Gorenje Tiki TC 200 ZCR, Instructions For Use Manual

Page: 16 / 152

16
Model TC 200-1/ZCR TC 300-1/ZCR TC 300-2/ZCR
Degree of protection IP 21
Max connected load [W] 620
Voltage 230 V / 50 Hz
Adjusted water temperature [
°C]
55
Legionella control programme [
°C]
65
Operation zone - air [
°C]
7 to 35
Max volumetric flow rate of air [m
3
/h] 480
Max acceptable pressure drop in the pipeline
(volumetric flow rate of air 480 m
3
/h) [Pa]
90
Refrigerating agent R 134a
Quantity of coolant [g] 780 780 780
*Heating time A7 / W10-55 [h:min] 7:22 11:10 11:10
*Energy consumption during heating A7 / W10-55 [kWh] 3,25 4,76 4,76
Type of measured cycle of emissions L XL XL
*Energy consumption in the selected cycle
of emissions A7/W10-55 [kWh]
4,9 7,26 7,26
*COP
DHW
in the selected cycle of emissions A7 / W10-55 2,6 2,8 2,8
Max quantity of usable water (min 40
°C) [l]
252,08 345,76 345,76
Sound power / Sound pressure at 1m [dB(A)] 56,7 / 44 56,7 / 44 56,7 / 44
1) Heating of domestic water from 10 °C to 45 °C with the inlet temperature of the heating medium of 80 °C and
flowrate of 3000 l/h.
(*) Heating of water to 55 °C at inlet air temperature of 7 °C, 89% humidity and inlet temperature of water of 10 °C; in
accordance with the EN16147 standard.
On the rear side of the hot water tank there are special channels (H1, H2) for mounting the
sensors for regulation of the system connection of the hot water tank to other heating
sources. Access to the channels is under the covering joint of the protective covering,
approximately in the middle of the tank height (marked J on the sketch).
Insert the sensor into the channel:
EN
TC 200-1/Z TC 300-1/Z TC 300-2/Z
A 1150 1550 1550
B 740 740 740
C 380 560 560
D - - 930
E - - 360
F 1010 1410 1410
H 1540 1940 1940
H* 1680 2080 2080
I 710 880 880
J 770 950 950
HV G 1 G 1 G 1
IM G 1 G 1 G 1
CV G 3/4 G 3/4 G 3/4
VM G 1 G 1 G 1
TV G 1 G 1 G 1
H1 150 200 200
H2 - - 200
HE - Heat exchanger
HV - Cold water inflow (blue rosette)
IM - HE medium outlet (blue rosette)
CV - Circulation conduit (blue rosette)
VM - HE medium inflow (red rosette)
TV - Cold water outflow (red rosette)
H1, H2 - Channel for sensors
VZ - Air inlet
IZ - Air outlet
View from above