Gomax QUADRA RXA006, Instruction Sheet

Page: 11 / 75

RXA006
RXA008
4.5 WORK STATION
The tool must be operated under pressure by a single operator .
The actual crimping operation, with the consequent use of the tool under pressure, is reserved to only one operator .
4.6 PERSONNEL QUALIFICATION
Before starting work, the personnel assigned to operate the tool must have studied this Chapter 4 Safety . This is true in
particular for personnel who may only use the tool sporadically.
Periodically check that the personnel, during their work, are following the safety and accident
prevention rules indicated in the instruction manual.
Define the responsibilities of the tool operator and authorize him to refuse any instructions given by other persons that are
contrary to the safety rules. Personnel in training may operate the tool only if constantly supervised by an experienced operator.
9
Before working with the tool, the operators must have read and understood the
instructions given in this manual, paying particular attention to the safety rules. Do
not use the tool if there are any other persons in the work station!