GOLDEN LITERIDER Envy Lite GP161 Owner'S Manual Download | Manualshive

Page: 27 / 42

background image

27

VII. OPERATION

Slow or Sluggish Movement
If the wheelchair does not travel at full speed or does not respond quickly enough, and
the battery condition is good, check the maximum speed setting. If adjusting the speed
setting does not remedy the problem, then there may be a non-hazardous fault. Contact
your Golden Technologies representative.

Maximum Speed/Profile Indicator
This LED array shows the maximum speed setting for the power chair or, if the control
system is programmed for drive profile operation, the selected drive profile.

Maximum Speed/Profile Indicator is Steady
The display will vary slightly depending on whether the control system is programmed
to operate with drive profiles.

Maximum Speed Indication
The number of LEDs illuminated shows the maximum speed setting. For example, if the
setting is speed level 4, then the four left hand LEDs will be illuminated.

Profile Indication
The LED illuminated shows the selected drive profile. For example, if drive profile 4 is
selected, then the fourth LED from the left will be illuminated.

Maximum Speed/Profile Indicator Ripples Up and Down
This indicates the control system is locked. Unlock the control system.

Locking/Unlocking the Wheelchair
The  nVR2  control  system  can  be  locked  to  prevent  unauthorized  use.  The  locking
method is via a sequence of key presses and joystick movements, as detailed below.

To lock the wheelchair:
• While the control system is switched on, depress and hold the on/off button.
• After 1 second the control system will beep. Now release the on/off button
• Deflect the joystick forwards until the control system beeps.
• Deflect the joystick in reverse until the control system beeps.
• Release the joystick, there will be a long beep.
• The wheelchair is now locked.

To unlock the wheelchair:
•  Use  the  on/off  button  to  switch  the  control  system  on.  The  maximum  speed/profile
indicator will be rippling up and down.
• Deflect the joystick forwards until the control system beeps.
• Deflect the joystick in reverse until the control system beeps.
• Release the joystick, there will be a long beep.
• The wheelchair is now unlocked.

«
...
25
26
27
28
29
...
»

Summary of Contents for Envy Lite GP161











































Reviews:

No comments

Related manuals for Envy Lite GP161

Brand: Medline Pages: 36

KLICK Power Limited Edition

Brand: Klaxon Pages: 37

Brand: Frontier Pages: 35

Brand: HOMCOM Pages: 4

Airrex LT Self-propelled

Brand: CareCo Pages: 24

Brand: Sunrise Medical Pages: 24

Brand: Sunrise Medical Pages: 36

Brand: Küschall Pages: 44

Brand: Küschall Pages: 60

Brand: PDS hygiene Pages: 2

Brand: Quickie Pages: 200

Brand: EZee Life Pages: 6

Brand: EZee Life Pages: 29

Brand: EZee Life Pages: 30

Freewheel-kit Bambino 3

Brand: panthera Pages: 4

Secura Premium 23556

Brand: Maximex Pages: 7

Concept Pro 62001000

Brand: Lehnen Pages: 4

Brand: Karman Healthcare Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands