background image

38 

 

XII. WARRANTY

 

 

 

 

 

Consumer Limited Warranty 

Power Wheelchair (continued) 

 

Items  not  mentioned  or  listed  are  covered  at  the  discretion  of  Golden  Technologies.  Any  accessories,  standard  or                  

optional, supplied by Golden Technologies, are covered for a period of one year from the date of purchase with the 

particular unit. 

 

Warranty Exclusions: 

 

Golden Technologies does not provide warranty on any of the following items which may require replacement due to 

the normal wear and tear of day to day usage: 

 
 

 

 

 
 

This warranty also excludes the following: 

 

 

Loss or theft of components 

 

Damage caused by: 

Battery fluid spillage or leakage. 
Abuse, misuse, accident or negligence. 
Improper operation, maintenance or storage. 
Commercial use or use other than normal. 
Repairs and/or modifications made to any part without the specific consent of  
Golden Technologies. 
Exceeding the specified weight capacity of the unit. 
Accessories other than those supplied or approved by Golden Technologies. 
Failure to adhere to the product instructions. 
Acts of Nature, such as lightning strikes, earthquakes, etc

….

 

Circumstances beyond the control of Golden Technologies. 

 

 

ANY PARTS ALTERED OR REPAIRED BY UNAUTHORIZED PERSON

 

Warranty Service: 

Warranty  Service  must  be  performed  by  an  authorized  Golden  Technologies  representative.    Golden  Technologies        

reserves  the  right  to  replace  warranted  part(s)  with  refurbished  or  new  part(s)  at  our  discretion.    All  labor  charges,                      

service calls, transportation costs or any other charge(s) associated with the installation of any warranted part(s) are the 

responsibility of the consumer.  Warranty is for the replacement of the parts only and does not include freight for the 

replacement parts. Consumers are not to return any item(s) to Golden Technologies without prior written authorization.  

Any damages incurred while warranted part(s) are in transport are the sole responsibility of the consumer.  

 

 

There is no other express warranty.

 

 

Implied warranties, including those of merchantability and fitness for a particular purpose are excluded.  Liabilities for 

consequential damages are excluded. 

 

This warranty gives you specific rights and you may also have other rights which may vary from state to state. 

 

       

 

REV.12.17  

 

Tires and Tubes 

 

ABS Plastic Shrouds 

 

Armrest Pads 

 

Motor Brushes 

 

Bulbs/Fuses 

 

Battery Cases 

 

Brake Pads 

 

Upholstery 

Summary of Contents for Envy Lite GP161











































Reviews: