GOLDEN LITERIDER Envy Lite GP161 Owner'S Manual Download

Page: 3 / 42

Thank you for purchasing your LiteRider

Envy Lite. We are honored you have chosen

Golden Technologies for your mobility needs.

LiteRider

Envy Lite (Model GP161)

Standard Packing List:

1 Owner’s Manual

Base with Under-the-Seat Basket

1 Battery Pack

1 Seat

2 Seat Arms

1 Safety Flag

1 Joystick Control

1 Battery Charger

Seat Post Nut and Bolt

FOR YOUR RECORDS

Please fill in your LiteRider

Envy Lite information below. This information will be useful

in the event that you ever need to contact Golden Technologies, Inc. concerning your
power chair.

Your LiteRider

Envy Lite

Model ____________________ Serial Number ____________________________________________

Date of Purchase ________________________ Body Color _________________________________

Options ______________________________________________________________________________

Your Golden representative or provider
Name ________________________________________________________________________________

Company ____________________________________________________________________________

Address ______________________________________________________________________________

Please remember to fill in and return your warranty registration card.

Tools Required:
The following tools will allow you to make all comfort adjustments to your power chair.

DISCLAIMER

We ask that you read this manual completely before operating your new
LiteRider

Envy Lite. Golden Technologies, Inc. is not and cannot be held responsible for

any damage or injury incurred due to improper or unsafe use of the Golden LiteRider

Envy Lite. Golden Technologies, Inc. specifically disclaims responsibility for any bodily

injury or property damage that may occur during any use that does not comply with
applicable federal, state, or local laws or ordinances.



Socket/Wrenches - 17mm, 14mm, 10mm, and 8mm



Allen Wrenches – 8mm, 5mm, and 4mm

Summary of Contents for Envy Lite GP161











































Search results

Summary of Contents for Envy Lite GP161

Reviews:

Related manuals for Envy Lite GP161

Brands by name

Popular brands

GOLDEN LITERIDER Envy Lite GP161, Owner'S Manual

Search results

Summary of Contents for Envy Lite GP161

Reviews:

Related manuals for Envy Lite GP161

Brands by name

Popular brands