manualshive.com logo in svg

GOLDEN LITERIDER Envy Lite GP161, Owner'S Manual, Page: 12 / 42

Share
Download
GOLDEN LITERIDER Envy Lite GP161 Owner'S Manual Download Page 12

12 

 

                               IV. ASSEMBLY 

 
Your  LiteRider 

® 

Envy  Lite  is  shipped  partially  disassembled  in  order  to  maximize  the                   

protection  of  all  its  parts  during  the  shipping  process.  Please  follow  the  instructions                
below to quickly and easily assemble the power chair for your use. 
 

 

You will need only basic tools. If you do not have the required tools, or if 

you do not feel capable of safely assembling your power chair, please contact your local 
Golden Technologies, Inc. representative. 

 
 
                                                                                                                        
Never use your LiteRider 

® 

Envy Lite’s 

wheels or arm assemblies 

as a handle. The wheels may rotate and/or the arms may pull out of the seat, 
which can cause an injury and/or damage to the power chair.  
 
Main Components 
1. Base with Under-the-Seat Basket  
2. Battery Pack 
3. Seat Assembly  
4. Joystick 
5. Foot Plate 

 
 

                                     

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

                                       

Seat Assembly 

Joystick 

Under-the-Seat Basket 

Footplate 

Base 

Battery Pack 

Figure 1 

Summary of Contents for Envy Lite GP161











































Reviews:

No comments