manualshive.com logo in svg

GOLDEN LITERIDER Envy Lite GP161, Owner'S Manual, Page: 7 / 42

Share
Download
GOLDEN LITERIDER Envy Lite GP161 Owner'S Manual Download Page 7

7 

 

II. SAFETY

 

 
Your  Golden  LiteRider 

® 

Envy  Lite  is  a  battery-operated  vehicle.  Please  exercise  caution 

and consideration when you are operating it. Driving your LiteRider 

® 

Envy Lite carefully 

and thoughtfully will help ensure your personal safety and the safety of other people. 
 

 
MANDATORY! Read and follow the owner’s manual before operating your power 
chair. 

  

 
Before  learning  to  operate  your  LiteRider 

® 

Envy  Lite,  have  your  Golden                              

Technologies, Inc. representative determine if it is advisable for you to practice getting on 
and off your power chair and operating it in the presence of an attendant. 
 
BEFORE getting on your LiteRider 

® 

Envy Lite 

• Check to be certain that the power is turned OFF. See “Operation” section on pages 22-
29. This will eliminate the possibility of accidentally activating the joystick and causing 
injury to you or to others.                                                                                                                                                            
• Check to be certain that your LiteRider 

® 

Envy Lite is not in the freewheel mode. See the 

“Operation” section on pages 22-29.                                                                                                                                         
• Flip up the armrests.                                                                                                                                                                                                                              
• Flip up the footrest. 
 
Getting ON your LiteRider 

® 

Envy Lite 

• Carefully seat yourself comfortably and securely on the seat.                                                              
• Flip down the footrest. 
• Flip down the armrests.                                                                                                                                            
• Fasten the seat belt if your chair is equipped with one. 
 
Getting OFF your LiteRider 

® 

Envy Lite 

• Make certain that the power is turned off.                                                                                    
• Unfasten the seat belt if your chair is equipped with one.                                                                 
• Flip up the armrests.                                                                                                                                         
• Flip up the footrest.                                                       

     

                                                                                   

• Carefully stand and step away from the chair. 
 
MAXIMUM WEIGHT                                                                                                                  
Your LiteRider 

® 

Envy Lite has been rated to a maximum payload (passenger and                                  

anything else being carried on the power chair) of

 

250

 

pounds. Exceeding the maximum 

weight rating will void your warranty.

 

 

Exceeding the maximum weight capacity will void your warranty 

and may result in injury to yourself and/or others.

 

 

 

Summary of Contents for Envy Lite GP161











































Reviews:

No comments