manualshive.com logo in svg

GOLDEN LITERIDER Envy Lite GP161, Owner'S Manual, Page: 6 / 42

Share
Download
GOLDEN LITERIDER Envy Lite GP161 Owner'S Manual Download Page 6

6 

 

 

 

 

 

 

 

 

 

 

 

 
*Some accessories require a mounting bracket or mounting clips. Please check with your 
provider to find out if the accessory you would like to order requires a mounting bracket 
or mounting clips. 

 

Safety Guidelines 
The  symbols  below  are  used  in  the  owner's  manual  and/or  on  the  product  to  identify 
warnings  and  to  notify  you  of  important  safety  information.  Make  sure  you  read  and   
understand them completely. 

 

             WARNING! Indicate(s) a hazardous situation which, if not avoided, could result   
             in death or serious injury. This icon is represented as a black symbol on a yellow   
             triangle with a black border. 

 

             MANDATORY! Failure to perform mandatory actions can cause personal injury   
             and/or equipment damage. This icon is represented as a white symbol on a blue   
             dot with a white border. 

 

             PROHIBITED! Indicate(s) an action(s) that should not be performed under any   
             circumstance. Failure to adhere can cause personal injury and/or equipment   
             damage. This icon is represented as a black symbol with a red circle and red  
             slash. 

 

Safety Symbols 
The  symbols  below  identify  warnings,  mandatory  actions,  and  prohibited  actions.  They 
can be found in the owner’s manual and/or on the product. Make sure you understand 
all  safety  labels  before  operating  the  product.  Do  not  remove  safety  labels  from  the   
product. 

         

          Read and follow the              Explosive conditions exist!             Indoor use only!                   
          owner’s manual!                                                   

 

 

                                                                                                                                                                      

          Use  only  AGM  or                      Avoid transmitters!                      Hot surface!                        
          Gel-Cell batteries!                     
               
 

       Pinch/Crush Hazard! 

       Do not place into trash!               Electrical hazard! 

                           
          

          Corrosive chemicals 

  Recycle                                    Do not use personal                       

        inside battery!                                                                            electronic devices! 

I. INTRODUCTION 

 

ACCESSORIES for the LiteRider 

® 

Envy Lite 

A variety of accessories are available for your Golden LiteRider 

® 

Envy Lite. Please contact 

your Authorized Golden Technologies Provider for more information or to order.

 

• Cane Holder Tube 
• Oxygen Tank Holder 
• Cup Holder 
• Quad Cane Holder 

• Walker Holder 
• Crutch Holder 
• Safety Flag                                                                                                        
• Power Chair Cover 

• Seat Belt 
• Travel Case  

Summary of Contents for Envy Lite GP161











































Reviews:

No comments