manualshive.com logo in svg

GOLDEN LITERIDER Envy Lite GP161, Owner'S Manual, Page: 9 / 42

Share
Download
GOLDEN LITERIDER Envy Lite GP161 Owner'S Manual Download Page 9

9 

 

II. SAFETY

 

 

SAFETY RULES 

 

 

• Do not attempt to use your LiteRider 

® 

Envy Lite on an escalator. Always use an                           

elevator. 

 

• Do not carry passengers on your power chair. 

 

• Do not operate your LiteRider 

® 

Envy Lite, if it is not functioning properly. 

 

• Use caution when driving on soft or uneven surfaces such as grass, gravel and on 
decks where there is no railing. 

 

• Never drive on the roadway, except when you must cross the street. 

 

• Always cross streets at intersections and use the most direct route, making sure that 
your path is clear and that you are visible to motor traffic. 

 

• It is not recommended to drive your LiteRider 

® 

Envy Lite, up or down a step or curb 

that is higher than 1-1/2 inches. 

 

• Never back up or down a step or curb. 

 

• Never operate your LiteRider 

® 

Envy Lite, while you are under the influence of alcohol. 

 

• Do not operate or store your power chair where it will be exposed to rain, snow, mist 
and below-freezing temperatures. 

 

• Do not operate your power chair on slippery, icy or salted surfaces. 

 

• Never sit on your power chair when it is in freewheel mode and on an incline or                      
decline. 

 

• Do not modify your power chair in any way that is not authorized by Golden          
Technologies, Inc. 

 

• Do not disassemble the tire. If disassembly is required, have your authorized Golden 
Technologies provider perform any necessary maintenance or repair. 

 

• Do not attempt to inflate the tires of your LiteRider 

® 

Envy Lite. Your power chair is 

equipped with foam-filled flat free tires that do not require inflation. 

 

• Never sit on your LiteRider 

® 

Envy Lite when it is being transported. 

 

• Always fasten down your LiteRider 

® 

Envy Lite securely with an approved tie-down                       

system while transporting your power chair. 

 

• Use caution when operating your LiteRider 

® 

Envy Lite while wearing long baggie               

clothing or clothing with loose belts, which could become entangled in the wheels of the 
power chair.  

 

• Always keep your feet firmly on the footplate surface when operating your LiteRider 

® 

Envy Lite to eliminate any potential of your feet becoming entangled in the wheels of the 

power chair.  

 

• Do not smoke will seated in and/or operating your LiteRider 

® 

Envy Lite.  

Summary of Contents for Envy Lite GP161











































Reviews:

No comments