![background image](http://html1.mh-extra.com/html/goldair/gbqa420/gbqa420_operating-instructions-manual_2240106020.webp)
•
Never leave burners on high for more than 10 minutes unless actually cooking. If the
burner makes hissing sounds when lit, it may be burning inside. Turn burner off,
allow it to cool and try again.
•
Never leave the side burner on high for more than 5 minutes.
•
Close the gas cylinder valve after each use.
•
Never use plastic or glass utensils on the BBQ.
•
Never use the BBQ in strong winds.
•
Never lay the gas cylinder down (always keep upright).
•
Never allow the flexible gas supply hose or any electrical cord to come in contact with
any heated surface of the BBQ or other heat source.
•
Never lean heavily on the side shelves of your BBQ or attempt to transport your BBQ
by lifting it from the side shelves.
•
Before you start cooking for the first time, clean the BBQ thoroughly with hot soapy
water. This is necessary to remove residuals and solvents, oil and grease, which may
have remained from the manufacturing process. The hotplate and grill should be
thoroughly cleaned in the same manner.
•
LED lights can be turned on at the button on the left hand side of the control panel.
Once assembled the battery pack should be secured as low as its’ cord will allow
attached to the inside of the cabinet
Operating your BBQ
Page 19
Summary of Contents for GBQA420
