![background image](http://html1.mh-extra.com/html/goldair/gbqa420/gbqa420_operating-instructions-manual_2240106008.webp)
REGULATOR CONNECTION
1.
Check that all control knobs are in the ‘Off’ position.
2.
Make sure the cylinder valve is off.
3.
Remove the protective cap from the cylinder, if present.
4.
Leak test the connection with a soapy water solution (Procedure located on Page 2 of
this manual)
NOTE
1.
Never use a rusty or dented gas cylinder with a damaged gas valve
2.
Never fill the gas cylinder beyond 80% capacity
3.
Always have the gas cylinder filled by an authorized ULPG supplier
4.
If you have any questions concerning assembly or operation, consult your dealer or
ULPG Gas Company.
5.
When used always place the BBQ and cylinder on flat level ground.
6.
You will need to have the ULPG cylinder serviced or replaced every ten years. The date
of the last service should be stamped on the neck of the bottle.
7.
Always use a spanner to tighten all gas fittings.
Safety Guide
Page 7
Summary of Contents for GBQA420
