32 oz. Pop-O-Gold
Model No. 2011 Series
Page 7
gmpopcorn.com
6.
Make sure kettle lead-in cord is securely plugged into unit, and the locking ring is fully
twisted onto the kettle receptacle (see image below).
7.
The main power cord extends out the bottom of the popper (reference image shown).
Base units are provided with 3 exit holes to route the power cord out of the cabinet.
Before plugging in the machine, have a certified electrician install the wall receptacle
and follow all requirements listed in the Electrical Requirements section of this manual.
The small power cord (6 pin Jones Plug) is the oil pump harness which supplies power
to the oil dispense unit. Refer to the Bag-in-a-Box or Bucket Pump Instruction Manual
included with the oil unit, to connect the oil dispense system to the popper and to add oil.
8.
There are magnets located inside the corner post to hold the Jet Scoop in place when
not in use (Jet Scoops are magnetic stainless steel and will attach to the magnets), see
image below.
9.
After setup, the unit should be cleaned. The kettle has a food grade protective coating
applied to the cooking surfaces, this coating must be removed prior to operating the
unit (see Care and Cleaning section of this manual).
Plug Kettle Lead in all the way,
and twist locking ring to secure.
2011
Magnets located on the
inside corner post to hold
scoop when not in use.
1
2
Power Cord
Power Cord Socket
(for 6 Prong Plug on
Oil Dispense Unit)
Aluminum Oil Line
(for connecting oil to popper)
Drop Panel
