32 oz. Pop-O-Gold
Model No. 2011 Series
Page 14
gmpopcorn.com
OIL SYSTEM MASTER SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the oil pump (either the
Bag-in-a-Box or Bucket Pump model). Reference the Instruction Manual for the oil
dispense unit.
Bag-in-a-Box Model: Oil System Master Switch ON, provides power to the oil dispense
unit, activates the cabinet warmer/blower, and the heated line kit (if equipped).
Note: Coconut oil will congeal at temperatures below approximately 76°F (24°C). For
machines used daily, leave the Oil System Master Switch on at all times and keep
the cabinet doors closed to prevent the oil from becoming solid. If the machine has
not been used for several days, turn the Oil System Master Switch ON the night
before it is expected to be used.
Bucket Pump Model: Oil System Master Switch ON, activates the small heating element
on the bucket pump to keep the coconut oil liquid.
RED OIL DISPENSE PUSH BUTTON (PB) SWITCH & GREEN OIL LIGHT
Red Push Button Switch - dispenses a predetermined amount of oil into the kettle when
pressed. The Oil System Master Switch must be ON for the Oil Dispense PB Switch to
activate (reference the Instruction Manual for the oil dispense unit). The Oil Light on the
popper will light continuously when oil pump is dispensing.
During calibration of the oil dispense unit, the yellow Load Dump or green Oil Light is
used to indicate when the oil dispense unit is in program mode.
CIRCUIT BREAKERS
The Circuit Breaker(s), located in cabinet interior on the ceiling of the popper, protects
the popper unit from overload condition. If unit is plugged in, but the kettle motor or oil
system does not come on when activated, then the circuit breaker(s) may be tripped.
(Reference the Troubleshooting section of this manual).
Controls View for standard 2011 Models (see next page for units with control options)
Oil
Light
Oil PB
Switch
Oil System
Master Switch
Load Dump
Indicator
Kettle Motor
Switch
Lights
Switch
Warmer
Switch
Kettle Heat
Switch
