32 oz. Pop-O-Gold
Model No. 2011 Series
Page 32
gmpopcorn.com
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS (Height x Width x Thickness)
Front Glass: 32 3/16” x 31 1/16” x 1/8”; Pass-Thru Models have side glass only.
Side Glass: 32 3/16” x 23 1/16” x 1/8”
Units with a side plate for a RH or LH Chute (dimensions for glass panel above the
chute plate): 20 1/4” x 23 1/16” x 1/8”
1.
Turn machine OFF, unplug unit and allow it to cool before attempting to replace glass.
2.
Carefully remove all loose pieces of broken glass.
3.
Lift out the corn pan (bottom pan).
4.
Locate the Glass Retainer Strips on each corner post holding in the glass panel, and
remove the screws to unfasten the retainers.
5.
Carefully remove the rest of the broken glass.
6.
Remove all rigid glass channels from around the glass to be replaced, set channels
aside for reuse.
7.
Apply decals (if desired) to new glass panel.
8.
Slide rigid glass channels over the exposed sides and bottom of new glass panel.
9.
Fasten new glass panel in machine with existing glass strips and screws.
10.
Reinstall corn pan (bottom pan).
