32 oz. Pop-O-Gold
Model No. 2011 Series
Page 10
gmpopcorn.com
Step 6: Place retainer on set
screw; loosen the split collar.
Step 7: Tilt kettle down and pull hanger arm away from the
kettle just enough to position knob and latch onto the set screw.
Step 8: Hold hanger arm away from kettle, and twist
knob to fasten, ensure knob tightens up to hanger harm.
Step 10: Make sure needle bearing properly sits in gear
block; check split collar spacing.
Step 11: Plug kettle lead in all the
way, and twist locking ring to secure.
Split Collar
1
2
3
1
Step 9: Lift latch to rotate kettle to
the upright position.
1
2
Check Split Collar spacing,
should be approx. 1/32”
(the thickness of a dime).
Set Split Collar
spacing to 1/32”,
then tighten the
set screws.
3
1
2
2
