Limitid indikator GWG - type GWS -issue 1
part no. 15 382 64 c
5 / 12
Probe length
Possible probe length
Z
= 100 ÷ 3000mm
The following must be observed during installation:
•
Limit indicator with probe tube lengths
Z
up to 300mm: The notch and the value for
Z
must
be visible upon installation.
•
Limit indicator with probe tube lengths
Z
= 1000 ÷ 3000mm: The probe tube protruding from
the tank must be protected against mechanical loads.
Telescopic length
Usable length = (170 ÷ 600)mm or (170 ÷ 760)mm depending on probe length
Telescope:
Probe length 700mm + telescope 170 ÷ 600mm
Probe length telescope 170 ÷ 760mm See
booklet 2
DESIGN
Table 3: Type GWS limit indicator basic design and terms
with pipe fitting 904 and
insert G 1,
e.g. Z = 400mm
Telescopic design with
pipe fitting 904 and
insert G 1,
e.g. Z = 400mm
with loose wall fitting 905
and insert G 1,
e.g. Z = 400mm
Connector, cap
Connector, joint
Probe length in mm, permanently impressed
Notch marking the probe length
Locking screw
Insert
Probe tube
Sensor
Sensor cover
Telescope
