INSTALLATION INSTRUCTIONS
Step-6
With assistance lift the Trailline front winch bumper up to the vehicle, align the holes in the face of the
bumper with the weld nuts on the frame brackets and secure the bumper to each frame bracket using (4) ½” x 1
1/2” flange head bolts and (4) ½” flat washers,
(FIGURE 5). adjust and hold the bumper visual alignment
position, then tighten the bolts securing the bumper to the frame brackets then tighten the nuts and bolts
securing the frame brackets to the vehicle frame.
Step-7
Reinstall the mesh front covers to the Trailline front winch bumper using the
¼” x ¾” button head
hex
drive screws and plastic flat washers removed in step-7, (FIGURE 6).
FIGURE 5
FIGURE 6
Passenger Side
Passenger Side
G-J
O
G-J
A-B
A-B
