GEK-99044
Chapter 5 Using the Set Up Menu
5-65
2.
Press the
▼
(down) menu browse pushbutton to access the
FF
Before LC
options.
3.
Press the
◄
(left) or
►
(right) menu browse pushbutton until the
desired option is displayed. Press the
Select
pushbutton to enable
or disable an option. The < symbol will immediately follow an
enabled option.
Interv Req
This menu option is used to enable/disable the Interv Req
(Intervention Required) option. When enabled, this causes an
intervention required message to be sent to the host computer if the
printer is busy or in an error condition. The time before sending the
Intervention Required message is set by the
Irq Err TO
and
Irq Bsy TO
options.
Use the following procedures to enable/disable a setting:
1.
While in the
Coax Compat
menu, press the
◄
(left) or
►
(right)
menu browse pushbuttons until
Interv Req
is displayed in the
lower right corner of the display.
2.
Press the
▼
(down) menu browse pushbutton to access the
Interv
Req
options.
3.
Press the
◄
(left) or
►
(right) menu browse pushbutton until the
desired option is displayed. Press the
Select
pushbutton to enable
or disable an option. The < symbol will immediately follow an
enabled option.
Irq Err TO
This menu option is used to select the IRQ Err TO setting for Coax
Compat. If the Interv Req option is enabled, the IRQ Err TO value
represents the amount of time available to clear an error (such as
paper jam or paper out, etc.) before the printer notifies the host
computer. Each value represents 5 seconds. The default value of 12
represents 60 seconds. This is a user set option.
Use the following procedures to select this option:
1.
While in the
Coax Compat
menu, press the
◄
(left) or
►
(right)
menu browse pushbutton until
IRQ Err TO
is displayed in the
lower right corner of the LCD.
2.
Press the
Select
pushbutton to configure the
Irq Err TO
option.
3.
Notice the cursor (underline) is now shown under the first digit.
Use the horizontal
◄
►
(left or right) menu browse pushbuttons
to position the cursor (underline) under the digit to be changed;
use the vertical
▲
▼
(up or down) menu browse pushbuttons to
increment/decrement the selected numeric digit by one.
4.
Press the
Clear
pushbutton after all changes are complete and the
desired value is displayed in the lower right corner of the LCD.
Note
Repeat this section if further changes are necessary.
FF Before LC
Disable<
Coax Compat
Interv Req
Interv Req
Enable<
Coax Compat
IRQ Err To
IRQ Err To
000