HOW TO LAMINATE
Stage 1 : Film Installation
Caution :
In the case of film width is above 1M or 25KG, More than 2persons is needed.
If you does not, you can suffer a personal injury.
Stage 2 : Rewinder Paper Pipe Installation
1. Insert the paper core into
the rewinder paper pipe
2. Insert the paper pipe shaft
into the rewinder paper pipe.
3. And then insert another
paper pipe core.
4. It is a figure of rewinder
installation finished.
Film installation is the same as the stage 1 of hot laminating.
Only the film should be placed at the upper end of the film core. MICRONEX is only for the single side laminator.
☞ Film should be passed by the sub-roller. (Refer to the film loading)
If you does not like that, it will cause a film crease.
ULTRA-THIN OVERLAY COATING (MICRONEX FILM)
27/39
