HOW TO LAMINATE
Stage 1 : Film Installation
1. Film Shaft : Device for loading a laminating roll film.
2. Film Shaft Pin : Device to prevent from moving film shaft.
3. Film Core : Device for fixing a laminating roll film.
CAUTION :
In the case of film width is above 1M or 25KG, More than 2persons is needed.
If you does not, you can suffer a personal injury.
HOT LAMINATING
1. Remove Film Shaft Pin.
5. Put Film Shaft and insert a
pin.
Structure of Film Shaft
Film Loading
3. Pull out a ring from
Film Core then load a film.
1
3
2
4. Arrange a position of film
and tighten a bolt with
enclosed 4mm wrench.
2. Pull Out Film Shaft.
23/39
