HOW TO LAMINATE
Stage 3 : To Ready For Laminating
Stage 4 : Laminating
ULTRA-THIN OVERLAY COATING (MICRONEX FILM)
1. After Installing separator,
insert the paper to push out.
2. It is the same as hot
laminating stage 2.
3. Rewind the film into the
rewinder paper pipe.
4. It is a readiness for
micronex film laminating.
☞ MICRONEX film necessarily should be used at the condition of bottom heat roller cooled down.
It is a same procedure just like the hot laminating stage 3.
☞ When you handle the micronex film, the caution to treat.
1. At the condition of no paper and roller stopping, roller pressure handle should be at the stand-by status.
2. On operating, necessarily use the cooling fan.
3. Below 80g paper is not separated.
29/39
