Page 19
Loosen the thumb nut, rotate the
swing bolt to open the microduct
clamp housing
Loosen and remove the (2) m2.5 fix-
ing screws. (Do not lose these
screws, they will be needed for the
replacement insert).
Remove the insert
Loosen the thumb nut, rotate the swing bolt
to open the air box
Loosen and remove the m4 fixing screw.
(Do not lose this screw, it will be needed for
the replacement insert)
Remove the insert
Repeat the process for the insert in the other
box half
To fit the new inserts, reverse the disassem-
bly procedure.
7.0 Procedure for changing inserts in the microduct clamp
Repeat the process for the insert in the other housing half
To fit the new inserts, reverse the disassembly procedure.
8.0 Procedure for changing inserts in the air box
