Page 18
The machine should be returned to the manufacturers after every 1000 hours use (or at intervals of 12
months) for a major service.
Clean Drive Belts
(Warm soapy water)
Clean debris from between
the belt drive assemblies
Ensure free rotation of rollers
Preventing as much contaminant as possible from entering the drive belt assemblies will aid the performance
of the machine. If necessary remove the drive belts. (See section 12.0) and clean the assemblies. Ensure free
rotation of rollers and smooth action of the Cross Arm assembly
It is necessary to periodically inspect inside the base (See section 14.0 for base removal) to check for belt
wear, debris and pulley wear/damage. Inspect the flanges on the pulleys are securely retained, bearings ro-
tate freely and all set screws are secure.
