GMI GDUnet, User Handbook Manual

Page: 45 / 122

flexiCal net OPERATION
3-19
3.4 ADVANCED EDITOR
Warning: The Advanced Editor should not normally
be accessed as gases, gas ranges and
corresponding limits are factory set and should
not require adjustment. GMI cannot be held
responsible if these values are edited.
This option is password protected, and can be accessed by
selecting ‘Advanced Editor’ button
from the ‘Setup Editor’
window, illustrated in Fig. 3-10.
Note: Advanced Editor options are only applicable to each
currently displayed gas setup.
Next, a password is required to proceed. Refer to Fig. 3-25.
Fig. 3-25 Advanced Editor Password Request
Note: The factory set password is ‘default’. This password can be
edited in ‘Preference Settings’ as detailed in section 3.6.
1. To proceed, enter the required password then click ‘OK’. The
following ‘Advanced Editor’ window is displayed:
In this example, illustrated in Fig. 3-26, a CombiGas cylinder is
used.