GMC GMC 2010 Terrain Navigation System, Owner'S Manual, Page: 354 / 410

9-80 Vehicle Care
8. Do not let the other end touch
metal. Connect it to the
positive (+) terminal of the
good battery. Use a remote
positive (+) terminal if the vehicle
has one.
9. Connect the black negative ( − )
cable to the negative ( − ) terminal
of the good battery. Use a
remote negative (
− ) terminal if
the vehicle has one.
Do not let the other end touch
anything until the next step. The
other end of the negative (
− )
cable does not go to the dead
battery. It goes to a heavy,
unpainted metal engine part or
to a remote negative (
− ) terminal
on the vehicle with the dead
battery.
10. Connect the other end of the
negative ( − ) cable away from
the dead battery, but not near
engine parts that move.
11. Start the vehicle with the good
battery and run the engine.
12. Press the unlock symbol
on the remote keyless entry
transmitter to disarm the
security system, if equipped.
13. Try to start the vehicle that had
the dead battery. If it will not
start after a few tries, it needs
service.
Notice: If the jumper cables are
connected or removed in the
wrong order, electrical shorting
may occur and damage the
vehicle. The repairs would not be
covered by the vehicle warranty.
Always connect and remove the
jumper cables in the correct
order, making sure that the
cables do not touch each other or
other metal.
Jumper Cable Removal
A. Heavy, Unpainted Metal Engine
Part or Remote Negative ( − )
Terminal
B. Good Battery or Remote
Positive (+) and Remote
Negative (
− ) Terminals
C. Dead Battery or Remote
Positive (+) Terminal