GMC GMC 2010 Terrain Navigation System Page 9 Owner'S Manual Download

Page: 9 / 410

Keys, Doors and Windows

1-3

Remote Keyless Entry
(RKE) System

See

Radio Frequency Statement on

page 12

‑

for information

regarding Part 15 of the Federal
Communications Commission (FCC)
Rules and RSS-210/211 of Industry
Canada.

Changes or modifications to this
system by other than an authorized
service facility could void
authorization to use this equipment.

If there is a decrease in the RKE
operating range:

Check the distance. The
transmitter may be too far from
the vehicle.

Check the location. Other
vehicles or objects may be
blocking the signal.

Check the transmitter's battery.
See

“

Battery Replacement

”

later

in this section.

If the transmitter is still not
working correctly, see your
dealer/retailer or a qualified
technician for service.

Remote Keyless Entry
(RKE) System Operation

The Remote Keyless Entry (RKE)
transmitter will work up to 60 m
(195 feet) away from the vehicle.

There are other conditions which
can affect the performance of the
transmitter. See

Remote Keyless

Entry (RKE) System on page 1

‑

RKE without Remote Start Shown

The following may be available:

(Lock):

Press to lock all doors.

The turn signal indicators may flash
and/or the horn may sound to
indicate locking, see

“

Remote

Lock Feedback

”

under

Vehicle

Personalization on page 4

‑

. If a

passenger door is open when

pressed, all doors lock. If the driver
door is open when

is pressed, all

doors lock except the driver door.
These settings can be modified.

Summary of Contents for GMC 2010 Terrain Navigation System



























































































































































































































































































































































































































Search results

Summary of Contents for GMC 2010 Terrain Navigation System

Reviews:

Related manuals for GMC 2010 Terrain Navigation System

Brands by name

Popular brands

GMC GMC 2010 Terrain Navigation System, Owner'S Manual

Search results

Summary of Contents for GMC 2010 Terrain Navigation System

Reviews:

Related manuals for GMC 2010 Terrain Navigation System

Brands by name

Popular brands