GMC GMC 2010 Terrain Navigation System, Owner'S Manual

Page: 259 / 410

Driving and Operating 8-51
Vehicles With a Navigation
System
An image appears on the navigation
screen with the message
“ Check
Surroundings for Safety ” when the
vehicle is shifted into R (Reverse).
The navigation screen goes to the
previous screen after approximately
10 seconds once the vehicle is
shifted out of R (Reverse).
To cancel the delay, do one of the
following:
. Press a hard key on the
navigation system.
. Shift into P (Park).
. Reach a vehicle speed of
8 km/h (5 mph).
Turning the Rear Vision Camera
System On or Off
To turn the rear vision camera
system on or off:
1. Shift into P (Park).
2. Press the CONFIG button.
3. Select Display.
4. Select Camera. When a check
mark appears next to the
Camera option, then the RVC
system is on.
Symbols
The navigation system may have a
feature that lets the driver view
symbols on the navigation screen
while using the RVC. The Ultrasonic
Rear Park Assist (URPA) system
must not be disabled to use the
caution symbols. The error message
“ Rear Parking Assist Symbols
Unavailable ” may display if URPA
has been disabled and the symbols
have been turned on. See
Ultrasonic Parking Assist on
page 8
‑ 47 .
The symbols appear and may
cover an object when viewing the
navigation screen when an object is
detected by the URPA system.
To turn the symbols on or off:
1. Shift into P (Park).
2. Press the CONFIG button.
3. Select Display.
4. Select Symbols. When a check
mark appears next to the
Symbols option, symbols will
appear.