GMC GMC 2010 Terrain Navigation System Owner'S Manual Download Page 307

Page: 307 / 410

Vehicle Care

9-33

Headlamps, Front Turn
Signal, Sidemarker, and
Parking Lamps

A. Low-Beam Headlamp

B. High-Beam headlamp

C. Side Marker Lamp

D. Park/Turn Signal Lamp

To replace:

1. Turn the tire to reach the access

port cap located in the front of
wheel well cover.

A. Screw

B. Access Port Cap

2. Remove screw (A) and turn

the access port cap (B)
counterclockwise to remove.

3. If replacing a low/high headlamp

bulb, remove the dust cover cap
from the back of the headlamp
housing by turning the cap
counterclockwise.

4. Turn the low/high beam or

park/turn signal bulb socket
counterclockwise to remove from
the lamp assembly.

5. Turn the sidemarker bulb socket

clockwise to remove from the
lamp assembly.

6. Remove the bulb from the

socket or disconnect bulb
assembly from harness
connector.

7. Install new bulb.

8. Reinstall the low/high beam or

park/turn signal bulb socket to
the lamp assembly, turning
clockwise.

9. Reinstall the sidemarker bulb

socket to the lamp assembly,
turning clockwise.

10. Replace the dust cover cap on

headlamps.

11. Reinstall the wheel well cover

access port cap and secure by
installing screw.

Summary of Contents for GMC 2010 Terrain Navigation System



























































































































































































































































































































































































































Search results

Summary of Contents for GMC 2010 Terrain Navigation System

Reviews:

GMC GMC 2010 Terrain Navigation System, Owner'S Manual, Page: 307 / 410

Search results

Summary of Contents for GMC 2010 Terrain Navigation System

Reviews: