GMC GMC 2010 Terrain Navigation System Page 153 Owner'S Manual Download

Page: 153 / 410

Infotainment System

6-15

Selecting an XM Channel

XM channels can be selected by
using

SEEK,

SEEK, the

MENU/SEL knob, or the menu
system.

Selecting a Channel Using

SEEK or

SEEK

(Radio with CD)

Press and release

SEEK or

SEEK to go to the previous

or next channel.

Press and hold

SEEK

SEEK to scroll through the

previous or next channel until
the channel is reached.

Selecting a Channel Using

SEEK or

SEEK (Radio

with CD/DVD and MEM)

Press and release

SEEK

SEEK to go to the previous

or next channel.

Selecting a Channel Using the
MENU/SEL Knob

To select an XM channel using the
MENU/SEL knob:

Turn the MENU/SEL knob to
highlight an XM channel, the
channel is selected after a short
delay.

To select a channel using the menu:

1. Turn the menu knob and select

Channel List.

2. Select the desired channel.

Selecting a Channel Using the
Menu System

1. Turn the MENU/SEL knob.

2. Select XM Category List.

3. Select the category.

4. Select the channel.

Storing an XM Channel as a
Favorite

Channels from all bands can be
stored in any order in the favorite
pages.

Up to six channels can be stored in
each favorite page and the number
of available favorite pages can
be set.

Storing a Channel as a Favorite

To store the channel to a position
in the list, press and hold the
corresponding 1 to 6 button until the
channel can be heard again.

Retrieving Channels

Press the FAV button to open a
favorite page or to change to
another favorite page. Briefly press
one of the 1 to 6 buttons to retrieve
the channel.

Summary of Contents for GMC 2010 Terrain Navigation System



























































































































































































































































































































































































































Search results

Summary of Contents for GMC 2010 Terrain Navigation System

Reviews:

Related manuals for GMC 2010 Terrain Navigation System

Brands by name

Popular brands

GMC GMC 2010 Terrain Navigation System, Owner'S Manual

Search results

Summary of Contents for GMC 2010 Terrain Navigation System

Reviews:

Related manuals for GMC 2010 Terrain Navigation System

Brands by name

Popular brands