ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
2051182-INS-RA
•
PAGE 1
INSTALLATION MANUAL
2051182
Parts List
1
Driver / left running board
1
Passenger / right running board
1
Driver / left mounting bracket, front
1
Driver / left mounting bracket, middle
1
Driver / left mounting bracket, rear
1
Passenger / right
mounting bracket, front
1
Passenger / right
mounting bracket, middle
1
Passenger / right
mounting bracket, rear
8
Hex head cap screw, M8
8
Pull-through nut, M8
8
Flat washer, M8
8
Lock washer, M8
2
Bolt plate, M10
2
Plastic bolt retainer, M10
4
Flat washer, M10
2
Lock washer, M10
2
Hex nut, M10 x 1.5
2
Carriage bolt, 1/2"-13 UNC, 1-3/4"
2
Flat washer, 1/2"
2
Lock washer, 1/2"
2
UNC Hex nut, 1/2"-13
2
CM-SP74 Spacer
Tools Required
Ratchet
Wrench set
Torque wrench
Level
Socket set
Utility knife
Socket extension
--
Maintenance
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
AeroTread
™
Running Boards
(not included)
Front
Rear
Torque Specifications
M
et
ric
M6 bolt
3 ft-lbs.
SA
E
1/4" bolt
3 ft-lbs.
M8 bolt
7 ft-lbs.
5/16" bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
3/8" bolt
16 ft-lbs.
M12 bolt
28 ft-lbs.
7/16" bolt
20 ft-lbs.
--
--
1/2" bolt
28 ft-lbs.
Use above torque setting unless otherwise noted
Product Registration and Warranty
CURT Group stands behind our products
with industry-leading warranties. Provide
feedback and help us to improve our
products by registering your purchase at:
warranty.curtgroup.com/surveys
Level of Difficulty
Easy
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
