![background image](http://html.mh-extra.com/html/gmc/camille-bauer-sineax-am2000/camille-bauer-sineax-am2000_device-handbook_2235742057.webp)
PM 1000087 000 12
Device handbook SINEAX AM2000
57/91
7.7.3 Micro SD card
Devices with data logger are supplied with a micro SD-Card, which provides long recording times.
Activity
The red LED located next to the SD card signals the logger activity. When data is written to the SD card
the LED becomes shortly dark.
Exchanging the card
For exchanging the SD card the removal key needs to be pressed. Once the LED becomes green the
card is logged off and can be removed. To remove the card, press it slightly into the device to release the
locking mechanism: The card is pushed out of the device.
If the SD card is not removed within 20s the exchanging procedure is cancelled and the card will be
mounted to the system again.
Data cannot be temporarily stored in the device. If there is no SD card in the device no recordings can be
done.
Data stored on the SD card can be accessed only as long as the card is
in the device. Stored data may be read and analyzed via the webpage
of the device or in reduced manner via display only. The content of the
SD card cannot be read using a Windows PC.
Thus before removing the SD card from the device, all data need to be
read via Ethernet interface.