![background image](http://html.mh-extra.com/html/gmc/camille-bauer-sineax-am2000/camille-bauer-sineax-am2000_device-handbook_2235742065.webp)
PM 1000087 000 12
Device handbook SINEAX AM2000
65/91
Safety
The current inputs are galvanically isolated from each other
Protection class:
II (protective insulation, voltage inputs via protective impedance)
Pollution degree:
2
Protection:
Front: IP40, IP54 (with sealing joint); Housing: IP30; Terminals: IP20
IP54 remark
Sealing joint must be applied on the entire
circumference of the housing; tested for CE
compliance only.
Rated voltage
Power supply V1: 110…230V AC / 130…230V DC
(versus earth):
Power supply V2: 24...48V DC
Power supply V3: 110…200V AC / 110…200V DC
Relay: 250 V AC (OVC III)
I/O’s: 24 V DC
Test voltages:
Test time 60s, acc. IEC/EN 61010-1 (2011)
• power supply versus inputs U
1)
:
3600V AC
• power supply versus inputs I:
3000V AC
• power supply V1, V3 versus bus, I/O’s:
3000V AC
• inputs U versus inputs I:
1800V AC
• inputs U versus bus, I/O’s
1)
:
3600V AC
• inputs I versus bus, I/O’s:
3000V AC
• inputs I versus inputs I:
1500V AC
1)
During type test only, with all protective impedances removed
The device uses the principle of protective impedance for the voltage inputs
to ensure protection against electric shock. All circuits of the device are
tested during final inspection.
Prior to performing high voltage or isolation tests involving the voltage
inputs, all output connections of the device, especially analog outputs, digital
and relay outputs as well as the Modbus and Ethernet interface, must be
removed. A possible high-voltage test between input and output circuits must
be limited to 500V DC, otherwise electronic components can be damaged.