![background image](http://html.mh-extra.com/html/gmc/camille-bauer-sineax-am2000/camille-bauer-sineax-am2000_device-handbook_2235742027.webp)
PM 1000087 000 12
Device handbook SINEAX AM2000
27/91
6. Commissioning
Before commissioning you have to check if the connection data of the device match the data
of the plant (see nameplate).
If so, you can start to put the device into operation by switching on the power supply and the
measurement inputs.
Measurement input
Input voltage
Input current
System frequency
1 Serial number
2 Test and conformity marks
3 Assignment voltage inputs
4 Assignment current inputs
5 Assignment power supply
6 Load capacity relay outputs
6.1 Parametrization of the device functionality
A full parameterization of all functions of the device is possible directly at the device. See:
6.2 Installation check
The correct connection of the current and voltage inputs can be checked in two ways.
a)
Sense of rotation check
: Using the sequence of the current and voltage phasors the sense of
rotation is determined and compared to the configured one. The phase rotation indicator is arranged
in the menu “Phasor diagram”.
Test requirement: Magnitude of all connected voltages at least 5% of nominal, magnitude of all
connected currents at least 0.2% of nominal.
Possible results
Correct sense of rotation
Wrong sense of rotation
Missing phase or magnitude too
small