![background image](http://html.mh-extra.com/html/gmc/camille-bauer-sineax-am2000/camille-bauer-sineax-am2000_device-handbook_2235742058.webp)
PM 1000087 000 12
Device handbook SINEAX AM2000
58/91
7.8 Timeouts
The device is designed to display measurements. So, any other procedure will be terminated after a
certain time without user interaction and the last active measurement image will be shown again.
Menu timeout
A menu timeout takes effect after 2 min. without changing the present menu selection. It doesn’t matter if
the currently displayed menu is the main menu or a sub-menu: The menu is closed and the last active
measurement image is displayed again.
Configuration timeout
After 5 min. without interaction in a parameter selection or during entering a value in the settings menu,
the active configuration step is closed and the associated parameter remains unchanged. The follow-up
procedure depends on what you have done before:
•
If the user did not change configuration parameters before the aborted step, the main menu will be
displayed and the device starts to monitor a possible menu timeout.
•
If the user changed configuration parameters before the aborted step, the query “Store configuration
changes?” is shown. If the user does not answer this query within 2 min. this dialogue is closed: The
changed configuration will be stored and activated and then the last active measurement image is
displayed again.