GMC 2016 Yukon XL Denali Owner'S Manual Download | Manualshive

Page: 30 / 396

background image

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-9159308) - 2016 - crc - 6/2/15

Keys, Doors, and Windows

29

.

Any vehicle door has been
opened and all doors are now
closed.

Keyless Unlocking/Locking from
the Passenger Doors

When the doors are locked and the
RKE transmitter is within 1 m (3 ft)
of the door handle, pressing the
lock/unlock button on a passenger
door handle will unlock all doors.
Pressing the lock/unlock button will
cause all doors to lock if any of the
following occur:

.

The lock/unlock button was used
to unlock all doors.

.

Any vehicle door has been
opened and all doors are now
closed.

Passive Locking

If equipped with Keyless Access,
this feature will lock the vehicle
several seconds after all doors are
closed, if the vehicle is off and at
least one RKE transmitter has been
removed from the interior, or none
remain in the interior.

If other electronic devices interfere
with the RKE transmitter signal, the
vehicle may not detect the RKE
transmitter inside the vehicle.
If passive locking is enabled, the
doors may lock with the RKE
transmitter inside the vehicle. Do
not leave the RKE transmitter in an
unattended vehicle.

To customize the doors to
automatically lock when exiting the
vehicle, see

“

Remote Lock, Unlock,

Start

”

under

Vehicle Personalization

0

155

.

Temporary Disable of Passive
Locking Feature

Temporarily disable passive locking
by pressing and holding

K

on the

interior door switch with a door open
for at least four seconds, or until
three chimes are heard. Passive
locking will then remain disabled
until

Q

on the interior door is

pressed, or until the vehicle is
turned on.

Keyless Liftgate Opening

Press the touch pad on the
underside of the liftgate handle to
open the liftgate when all doors are
unlocked, or when the transmitter is
within 1 m (3 ft).

Keyless Liftglass Opening

Press the exterior liftglass button to
open the liftglass when all doors are
unlocked, or when the transmitter is
within 1 m (3 ft).

See

Liftgate

0

36

.

Keyed Access

To access a vehicle with a dead
transmitter battery, see

Door Locks

0

34

.

Programming Transmitters to
the Vehicle

Only RKE transmitters programmed
to the vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
The vehicle can be reprogrammed
so that lost or stolen transmitters no

«
...
28
29
30
31
32
...
»

Summary of Contents for 2016 Yukon XL Denali













































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Yukon XL Denali

Brand: ZAPTEC Pages: 240

Brand: Lancia Pages: 276

Brand: T-Tech Pages: 38

Brand: AA Products Pages: 8

Retrotech RTX-68D-CHG

Brand: Dakota Digital Pages: 4

Brand: Kia Pages: 54

Brand: Metra Electronics Pages: 2

Camaro 12000 1968 Series

Brand: Chevrolet Pages: 455

Brand: Curt Manufacturing Pages: 6

Brand: GMC Pages: 20

Brand: SCC Pages: 4

Brand: v.link Pages: 12

Brand: TOP VEHICLE TECH Pages: 8

Brand: MiX Telematics Pages: 39

MagicWatch MWE150

Brand: Waeco Pages: 176

Brand: HAKR Pages: 10

2018 GRAND CHEROKEE

Brand: Jeep Pages: 372

Brand: DiscountRamps Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands