manualshive.com logo in svg

GMC 2016 Yukon XL Denali, Owner'S Manual

The GMC 2016 Yukon XL Denali's "Getting To Know Manual" is a comprehensive guide that allows users to fully understand and appreciate the vehicle's advanced features. Easily accessible on our website, this manual can be downloaded for free, giving you the opportunity to explore and maximize your Yukon XL Denali's capabilities.

Share
Download
background image

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-9159308) - 2016 - crc - 6/2/15

Driving and Operating

255

Trailer Brake Control Panel

1. Manual Trailer Brake Apply

Lever

2. Trailer Gain Adjustment

Buttons

The ITBC system has a control
panel on the instrument panel to the
left of the steering column. The
control panel allows adjustment to
the amount of output, referred to as
Trailer Gain, available to the trailer
brakes and allows manual
application of the trailer brakes. The
Trailer Brake Control Panel is used
along with the Trailer Brake Display

Page on the DIC to adjust and
display power output to the trailer
brakes.

Trailer Brake DIC Display Page

The ITBC system displays
messages in the Driver Information
Center (DIC).

The display page indicates Trailer
Gain setting, power output to the
trailer brakes, trailer connection, and
system operational status.

To display the Trailer Brake Display
Page do any of the following:

.

Scroll through the DIC menu
pages.

.

Press a Trailer Gain button.
If the Trailer Brake Display Page
is not currently displayed, press
a Trailer Gain button to recall the
current Trailer Gain setting.
Each press and release of the
gain buttons will then change the
Trailer Gain setting.

.

Activate the Manual Trailer
Brake apply lever.

TRAILER GAIN: This setting can be
adjusted from 0.0 to 10.0 with either
a trailer connected or disconnected.
To adjust the Trailer Gain, press one
of the Trailer Gain adjustment
buttons. Press and hold a gain
button to continuously adjust the
Trailer Gain. To turn the output to
the trailer off, adjust the Trailer Gain
setting to 0.0 (zero).

TRAILER OUTPUT: Displays any
time a trailer with electric brakes is
connected. Output to the trailer
brakes is based on the amount of
vehicle braking present and relative
to the Trailer Gain setting. Output is
displayed from 0 to 100% for each
gain setting.

The Trailer Output will indicate

“

- - -

- - -

”

on the Trailer Brake Display

Page whenever the following occur:

.

No trailer is connected.

.

A trailer without electric brakes
is connected (no DIC message
displayed).

Summary of Contents for 2016 Yukon XL Denali













































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Yukon XL Denali

Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Curt Manufacturing 31048 Installation Instructions Manual preview
31048
Brand: Curt Manufacturing Pages: 6
Chevrolet Impala Limited 2014 Owner'S Manual preview
Impala Limited 2014
Brand: Chevrolet Pages: 356
Nav TV Ford 4” UNI-CAM Manual preview
Ford 4” UNI-CAM
Brand: Nav TV Pages: 6
Saab 2007 9-3 Remote Starter Owner'S Manual preview
2007 9-3 Remote Starter
Brand: Saab Pages: 304
EUFAB 16458 Operating Instructions Manual preview
16458
Brand: EUFAB Pages: 16
Volvo 2006 XC70 Owner'S Manual preview
2006 XC70
Brand: Volvo Pages: 211
Subaru 2003 Baja Owner'S Manual preview
2003 Baja
Brand: Subaru Pages: 32
BMW i wallbox Installation Instructions Manual preview
i wallbox
Brand: BMW Pages: 40
Yakima LockNLoad LightenUp Manual preview
LockNLoad LightenUp
Brand: Yakima Pages: 13
AA Products APX2501 BLK Instruction Manual preview
APX2501 BLK
Brand: AA Products Pages: 8
Kia quoris Manual preview
quoris
Brand: Kia Pages: 522
Pyle PLCAP50R Manual preview
PLCAP50R
Brand: Pyle Pages: 4
LAS 10155 Manual preview
10155
Brand: LAS Pages: 4
LAS 11805 Manual preview
11805
Brand: LAS Pages: 24
Honda 2012 CR-Z Owner'S Manual preview
2012 CR-Z
Brand: Honda Pages: 332
Nav TV MyTouch VIM Quick Start Manual preview
MyTouch VIM
Brand: Nav TV Pages: 2

Brands by name

Popular brands

Load more brands