GMC 2016 Yukon XL Denali Owner'S Manual Download Page 31 | Manualshive

Page: 31 / 396

GMC 2016 Yukon XL Denali Owner'S Manual Download Page 31

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-9159308) - 2016 - crc - 6/2/15

30

Keys, Doors, and Windows

longer work. Each vehicle can have
up to eight transmitters matched
to it.

Programming with a Recognized
Transmitter (Keyless Access
Vehicles Only)

A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.

To program, the vehicle must be off
and all transmitters, both currently
recognized and new, must be
with you.

1. Remove the key from the

recognized transmitter.

2. Place the recognized

transmitter(s) in the cupholder
or on the passenger seat.

3. Insert the vehicle key into the

key lock cylinder on the driver
door handle. Then turn the key
counterclockwise, to the unlock
position, five times within
10 seconds.

The Driver Information Center
(DIC) displays READY FOR
REMOTE#2, 3, 4, ETC.

4. Place the new transmitter in

the transmitter pocket/insert.

Open the center console
storage area and the storage
tray. The transmitter pocket/
insert is in front of the storage
area next to the center console
storage area between the
driver and front passenger
seats.

5. Press the ENGINE START/

STOP button. When the
transmitter is learned, the DIC
display will show that it is ready
to program the next transmitter.

6. Remove the transmitter from

the transmitter pocket and
press

K

or

Q

on the

transmitter.

To program additional
transmitters, repeat Steps 4

–

6.

When all additional transmitters
are programmed, press and
hold the ENGINE START/
STOP button for approximately
12 seconds to exit
programming mode.

7. Return the key back into the

transmitter.

Programming without a
Recognized Transmitter (Keyless
Access Vehicles Only)

If there are no currently recognized
transmitters available, follow this
procedure to program up to eight
transmitters. This feature is not
available in Canada. This procedure
will take approximately 30 minutes
to complete. The vehicle must be off
and all transmitters to be
programmed must be with you.

1. Remove the vehicle key from

the transmitter.

«
...
29
30
31
32
33
...
»

Summary of Contents for 2016 Yukon XL Denali













































































































































































































































































































































































































Reviews:

No comments