GMC 2016 Yukon XL Denali Owner'S Manual Download Page 43 | Manualshive

Page: 43 / 396

GMC 2016 Yukon XL Denali Owner'S Manual Download Page 43

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-9159308) - 2016 - crc - 6/2/15

42

Keys, Doors, and Windows

by pressing

K

on the RKE

transmitter during the 10-second
pre-alarm, the alarm will be
activated.

The alarm will also be activated if a
passenger door, the liftgate, or the
hood is opened without first
disarming the system. When the
alarm is activated, the turn signals
flash and the horn sounds for about
30 seconds. The alarm system will
then re-arm to monitor for the next
unauthorized event.

Disarming the Alarm System

To disarm the alarm system or turn
off the alarm if it has been activated:

.

Press

K

on the RKE transmitter.

.

Unlock the vehicle using the
Keyless Access system.

.

Start the vehicle.

To avoid setting off the alarm by
accident:

.

Lock the vehicle after all
occupants have exited.

.

Always unlock a door with the
RKE transmitter, or use the
Keyless Access system.

Unlocking the driver door with
the key will not disarm the
system or turn off the alarm.

How to Detect a Tamper
Condition

If

K

is pressed on the RKE

transmitter and the horn chirps three
times, an alarm occurred previously
while the alarm system was armed.

If the alarm has been activated, a
message will appear on the DIC.
See

Security Messages

0

151

.

Power Sounder, Inclination
Sensor, and Intrusion Sensor

In addition to the standard
theft-deterrent system features, this
system may also have a power
sounder, inclination sensor, and
intrusion sensor.

The power sounder provides an
audible alarm which is distinct from
the vehicle

’

s horn. It has its own

power source, and can sound an
alarm if the vehicle

’

s battery is

compromised.

The inclination sensor can set off
the alarm if it senses movement of
the vehicle, such as a change in
vehicle orientation.

The intrusion sensor monitors the
vehicle interior, and can activate the
alarm if it senses unauthorized entry
into the vehicle

’

s interior. Do not

allow passengers or pets to remain
in the vehicle when the intrusion
sensor is activated.

Before arming the theft-deterrent
system and activating the intrusion
sensor:

.

Make sure all doors and
windows are completely closed.

.

Secure any loose items such as
a sunshades.

.

Make sure there are no
obstructions blocking the
sensors in the front overhead
console.

.

Close DVD screens before
leaving the vehicle.

«
...
41
42
43
44
45
...
»

Summary of Contents for 2016 Yukon XL Denali













































































































































































































































































































































































































Reviews:

No comments