manualshive.com logo in svg

GMC 2016 Yukon XL Denali, Owner'S Manual, Page: 166 / 396

Share
Download
GMC 2016 Yukon XL Denali Owner'S Manual Download Page 166

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-9159308) - 2016 - crc - 6/2/15

Lighting

165

Lighting

Exterior Lighting

Exterior Lamp Controls . . . . . . . 165
Exterior Lamps Off

Reminder . . . . . . . . . . . . . . . . . . . 166

Headlamp High/Low-Beam

Changer . . . . . . . . . . . . . . . . . . . . 166

Flash-to-Pass . . . . . . . . . . . . . . . . 166
Daytime Running

Lamps (DRL) . . . . . . . . . . . . . . . 166

Automatic Headlamp

System . . . . . . . . . . . . . . . . . . . . . . 167

Hazard Warning Flashers . . . . . 168
Turn and Lane-Change

Signals . . . . . . . . . . . . . . . . . . . . . . 168

Fog Lamps . . . . . . . . . . . . . . . . . . . 169

Interior Lighting

Instrument Panel Illumination

Control . . . . . . . . . . . . . . . . . . . . . . 169

Dome Lamps . . . . . . . . . . . . . . . . . 170
Reading Lamps . . . . . . . . . . . . . . 170

Lighting Features

Entry Lighting . . . . . . . . . . . . . . . . 171
Exit Lighting . . . . . . . . . . . . . . . . . . 171
Battery Load Management . . . 171
Battery Power Protection . . . . . 172

Exterior Lighting

Exterior Lamp Controls

The exterior lamp control is on the
instrument panel to the left of the
steering wheel.

There are four positions:

O

(Off) :

Turns off the automatic

headlamps and Daytime Running
Lamps (DRL). Turn the headlamp
control to the off position again to
turn the automatic headlamps or
DRL back on.

For vehicles first sold in Canada,
the off position will only work when
the vehicle is shifted into P (Park).

AUTO (Automatic) :

Automatically

turns on the headlamps, parking
lamps, taillamps, instrument panel
lights, roof marker lamps (if
equipped), and license plate lamps.

When the vehicle is turned off and
the headlamps are in AUTO, the
headlamps turn off. When the key is
removed, the headlamps
automatically come on for a set
time. The time of the delay can be
changed using the DIC. See

Driver

Information Center (DIC)

0

137

.

;

(Parking Lamps) :

Turns on the

parking lamps including all lamps,
except the headlamps.

2

(Headlamps) :

Turns on the

headlamps with the parking lamps
and instrument panel lights.

When the headlamps are turned on
while the vehicle is on, the
headlamps turn off automatically
10 minutes after the ignition is
turned off. When the headlamps are
turned on while the vehicle is off,

Summary of Contents for 2016 Yukon XL Denali













































































































































































































































































































































































































Reviews:

No comments