GMC 2016 Yukon XL Denali Owner'S Manual Download Page 137

Page: 137 / 396

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-9159308) - 2016 - crc - 6/2/15

136

Instruments and Controls

Front Fog Lamp Light

For vehicles with fog lamps, this
light comes on when the fog lamps
are on.

The light goes out when the fog
lamps are turned off. See

Fog

Lamps

169

for more information.

Lamps On Reminder

This light comes on when the
exterior lamps are in use. See

Exterior Lamp Controls

165

Cruise Control Light

The cruise control light is white
when the cruise control is on and
ready, and turns green when the
cruise control is set and active.

See

Cruise Control

221

Adaptive Cruise Control Light

This light is white when the Adaptive
Cruise Control (ACC, if equipped) is
on and ready, and turns green when
the ACC is set and active. See

Adaptive Cruise Control

224

Door Ajar Light

This light comes on when a door is
open or not securely latched. Before
driving, check that all doors are
properly closed.

Summary of Contents for 2016 Yukon XL Denali













































































































































































































































































































































































































Search results

Summary of Contents for 2016 Yukon XL Denali

Reviews:

GMC 2016 Yukon XL Denali, Owner'S Manual, Page: 137 / 396

Search results

Summary of Contents for 2016 Yukon XL Denali

Reviews: