Home
/
GMC
/
2016 Yukon XL Denali
/
Owner'S Manual

GMC 2016 Yukon XL Denali, Owner'S Manual, Page: 288 / 396

Share

Page: 288 / 396

GMC 2016 Yukon XL Denali Owner'S Manual Download Page 288

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-9159308) - 2016 - crc - 6/2/15

Vehicle Care

287

Replacement Bulbs

Exterior Lamp

Bulb

Number

Back-up Lamp

W16W

Fog Lamp

PSX26W

License
Plate Lamp

H11 LL

For replacement bulbs not listed
here, contact your dealer.

Electrical System

Electrical System
Overload

The vehicle has fuses to protect
against an electrical system
overload. Fuses also protect power
devices in the vehicle.

Replace a bad fuse with a new one
of the identical size and rating.

If there is a problem on the road and
a fuse needs to be replaced, there
are some spare fuses and a fuse
puller in the Instrument Panel Fuse
Block. The same amperage fuse
can also be borrowed. Choose
some feature of the vehicle that is
not needed to use and replace it as
soon as possible.

Headlamp Wiring

An electrical overload may cause
the lamps to go on and off, or in
some cases to remain off. Have the
headlamp wiring checked right away
if the lamps go on and off or
remain off.

Windshield Wipers

If the wiper motor overheats due to
heavy snow or ice, the windshield
wipers will stop until the motor cools
and will then restart.

Although the circuit is protected
from electrical overload, overload
due to heavy snow or ice may
cause wiper linkage damage.
Always clear ice and heavy snow
from the windshield before using the
windshield wipers.

If the overload is caused by an
electrical problem and not snow or
ice, be sure to get it fixed.

Fuses

The wiring circuits in the vehicle are
protected from short circuits by
fuses. This greatly reduces the
chance of fires caused by electrical
problems.

Look at the silver-colored band
inside the fuse. If the band is broken
or melted, replace the fuse. Be sure
you replace a bad fuse with a new
one of the identical size and rating.

«
...
286
287
288
289
290
...
»

Summary of Contents for 2016 Yukon XL Denali













































































































































































































































































































































































































Reviews:

No comments