GMC 2011 Full-Size Truck Navigation System, User Manual

Page: 82 / 86

82 Infotainment System
. To cancel a command or if the
system response does not
match your verbal command,
press and hold the talk symbol
button. The system will reply,
“ System will cancel the voice
recognition ” .
. If you experience difficulty
with the system recognizing
a command, try saying it
more softly, and wait for a few
seconds after the beep, or you
may just try saying it again.
. Background noise may
cause voice commands to
be misunderstood, including
airflow noise from wind.
. To use the voice recognition
system, the map DVD must be
loaded.
This system is able to recognize
commands in three different
languages. The system will only
recognize commands based on
the language selected from the
Driver Information Center (DIC).
See
“ Driver Information Center, DIC
Vehicle Personalization ” in the Index
of your vehicle's owner manual.
Voice Recognition Commands
The following list shows all of the
voice commands available for the
navigation system with a brief
description of each. The commands
are listed with the optional words
in brackets. To use the voice
commands, refer to the instructions
listed previously.
Voice Tag Commands
The following are voice tag
commands you can access by
clearly stating the commands
exactly as they are written.
You may have up to 40 voice
tag entries for destinations.
Navigation go to [destination]
(voice tag), navigation select
[destination] (voice tag):
These
commands instruct the system to
select a destination saved under
the voice tag you have stored.
When a destination is requested
using a voice tag, the system will
state,
“ Press or say cancel if not
correct ” . To cancel this voice tag
destination, using voice recognition,
push and hold the SRCE button on
the steering wheel until you hear a
beep, then say
“ cancel ” . Canceling
voice tag destination by voice
recognition, must be done within
five seconds after the voice prompt.
If you are not currently driving on a
route, the system will automatically
create the voice tag destination as
the final destination. If you are
currently driving on a route, the
system will automatically create the
voice tag destination as a waypoint.
Up to three waypoints can be
created.