Trailer Wiring Harness
Your vehicle is equipped with the following wiring
harnesses for towing a trailer.
Basic Trailer Wiring
The trailer wiring harness, with a seven-pin
connector, is located at the rear of the vehicle and
is tied to the vehicle’s frame. The harness
connector can be plugged into a seven-pin
universal heavy-duty trailer connector available
through your dealer.
The seven-wire harness contains the following
trailer circuits:
•
Yellow: Left Stop/Turn Signal
•
Dark Green: Right Stop/Turn Signal
•
Brown: Taillamps
•
White: Ground
•
Light Green: Back-up Lamps
•
Red: Battery Feed*
•
Dark Blue: Trailer Brake*
*The fuses for these two circuits are installed in
the underhood electrical center, but the wires
are not connected. They should be connected by
your dealer or a qualified service center.
444
Summary of Contents for 2007 Yukon XL
