Rear Tire Flat: If the flat tire is on a rear tire
of the vehicle, you will need to use the
jack handle (B) and both jack handle
extensions (C). Attach the wheel wrench (D)
to the jack handle extensions (C). Attach
the jack handle (B) to the jack (A). Use the
jacking pad provided on the rear axle. Turn the
wheel wrench (D) clockwise to raise the
vehicle.
Raise the vehicle far enough off the ground so
there is enough room for the spare tire to
clear the ground.
4. Remove all of the
wheel nuts.
5. Take off the flat tire.
542
Summary of Contents for 2007 Yukon XL
