GMC 2007 Yukon XL, Owner'S Manual

Page: 210 / 630

Windshield Washer
{
CAUTION:
In freezing weather, do not use your
washer until the windshield is warmed.
Otherwise the washer fluid can form ice
on the windshield, blocking your vision.
L
(Washer Fluid): There is a paddle marked
with the windshield washer symbol at the top of the
multifunction lever. To spray washer fluid on the
windshield, push the paddle. The wipers will
clear the window and then either stop or return to
your preset speed.
Heated Windshield Washer
If your vehicle has the heated windshield washer
fluid system it may be used to help clear ice,
snow, tree sap, or bugs from your windshield.
The button is located in
the switchbank under
the climate controls.
Push the heated washer fluid button to activate
the heated windshield washer fluid system.
The indicator light will flash. This activation will
initiate four heated wash/wipe cycles. The
first heated wash/wipe cycle may take up to
40 seconds to occur, depending on outside
temperature. After the first wash/wipe cycle, it may
take up to 20 seconds for each of the remaining
cycles to begin. Press the button again to turn
off the heated windshield washer fluid system or it
will automatically turn off after four wipe cycles
have been completed.
When the heated windshield washer fluid system
is activated under certain outside temperature
conditions, steam may flow out of the washer
nozzles for a short period of time before washer
fluid is sprayed. This is a normal condition.
210