GMC 2003 Yukon XL Owner'S Manual Download Page 72

Page: 72 / 518

To remove the child restraint, just unbuckle the vehicle’s
safety belt. It will be ready to work for an adult or
larger child passenger.

Securing a Child Restraint in the
Center Front Seat Position

Don’t use child restraints in this position. The restraints
won’t work properly.

Securing a Child Restraint in the
Right Front Seat Position

1-66

Summary of Contents for 2003 Yukon XL







































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands

GMC 2003 Yukon XL, Owner'S Manual

Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands