GMC 2003 Yukon XL Owner'S Manual Download Page 440

Page: 440 / 518

4. Insert the hoist end (F)

through the hole (G) in
the rear bumper
and into the hoist
shaft.

5. Raise the tire part way upward. Make sure the

retainer is seated in the wheel opening.

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise
until you hear two clicks or feel it skip twice. You
cannot overtighten the cable.

A. Push and Pull

B. Rotate Tire

7. Make sure the tire is stored securely. Push, pull,

and then try to rotate or turn the tire. If the tire
moves, use the wheel wrench to tighten the cable.
Reinstall the spare tire lock (if equipped).

5-82

Summary of Contents for 2003 Yukon XL







































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands

GMC 2003 Yukon XL, Owner'S Manual

Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands