GMC 2003 Yukon XL Owner'S Manual Download Page 453

Page: 453 / 518

Vehicle Care/Appearance Materials

See your GM dealer for more information on purchasing
the following products.

Vehicle Care/Appearance Materials

Description

Usage

Polishing Cloth
Wax-Treated

Interior and exterior
polishing cloth.

Tar and Road Oil
Remover

Removes tar, road oil and
asphalt.

Chrome Cleaner and
Polish

Use on chrome or stainless
steel.

White Sidewall Tire
Cleaner

Removes soil and black
marks from whitewalls.

Vinyl Cleaner

Cleans vinyl tops,
upholstery and convertible
tops.

Glass Cleaner

Removes dirt, grime,
smoke and fingerprints.

Chrome and Wire
Wheel Cleaner

Removes dirt and grime
from chrome wheels and
wire wheel covers.

Finish Enhancer

Removes dust, fingerprints,
and surface contaminants.
Spray on wipe off.

Vehicle Care/Appearance Materials

(cont’d)

Description

Usage

Swirl Remover Polish

Removes swirl marks, fine
scratches and other light
surface contamination.

Cleaner Wax

Removes light scratches
and protects finish.

Foaming Tire Shine
Low Gloss

Cleans, shines and protects
in one easy step, no wiping
necessary.

Wash Wax Concentrate

Medium foaming shampoo.
Cleans and lightly waxes.
Biodegradable and
phosphate free.

Spot Lifter

Quickly and easily removes
spots and stains from
carpets, vinyl and cloth
upholstery.

Odor Eliminator

Odorless spray odor
eliminator used on fabrics,
vinyl, leather and carpet.

See your General Motors parts department for these
products. See

Part D: Recommended Fluids and

Lubricants on page 6-17.

5-95

Summary of Contents for 2003 Yukon XL







































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands

GMC 2003 Yukon XL, Owner'S Manual

Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands