GMC 2003 Yukon XL Owner'S Manual Download Page 412

Page: 412 / 518

A. Low-Beam Headlamp

B. High-Beam Headlamp

2. Pull the headlamp assembly out.

3. Unplug the electrical connector.

4. Turn the old bulb counterclockwise and remove it

from the headlamp assembly.

5. Put the new bulb into the assembly and turn it

clockwise until it is tight. Use care not to touch
the bulb with your fingers or hands.

6. Plug in the electrical connector.

7. Put the headlamp assembly back into the vehicle.

Install and tighten the two pins.

Front Turn Signal, Sidemarker and
Daytime Running Lamps

A. Sidemarker Lamp

B. Retainer Clip

C. Front Turn Signal Lamp

D. Daytime Running Lamp

1. Remove the headlamp assembly as mentioned

previously.

2. Press the retainer clip, located behind the turn

signal housing, towards the outside of the vehicle.

3. Pull the turn signal housing out from the vehicle.

4. Press the locking release lever, turn the bulb socket

counterclockwise and remove it from the turn signal
housing.

5-54

Summary of Contents for 2003 Yukon XL







































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands

GMC 2003 Yukon XL, Owner'S Manual

Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands