GMC 2003 Yukon XL Owner'S Manual Download Page 369

Page: 369 / 518

Hood Release

To open the hood do the following:

1. Pull the handle inside

the vehicle located
under and to the left of
the steering wheel.

2. Then go to the front of the vehicle and pull up on

the secondary hood release located near the
center of the grill.

3. Lift the hood.

Before closing the hood, be sure all filler caps are
on properly. Pull down the hood and close it firmly.

5-11

Summary of Contents for 2003 Yukon XL







































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands

GMC 2003 Yukon XL, Owner'S Manual

Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands